This literature may be useful in answering questions about instrumentation, validation, compaction, tableting, granulation, optimization, etc.

Abel JT. Computer system validation:  Questions for the audit. Pharm Eng, 9/10:50-59, 1993

Achanta AS, Adusumilli P, James KW. Endpoint determination and its relevance to physicochemical characteristics of solid dosage forms. Drug Dev Ind Pharm, 23(6):539-546, 1997

Achanta AS, et al. Development of hot melt coating methods. Drug Dev Ind Pharm, 23(5):441-449, 1997

Adams J M, et al. Apparatus for High-Speed Accurate Counting and Handling of Desecrate Objects such as Tablets. US Patent, 3,997,063, 1976

Ahmed H, et al.. Pharmaceutical powder mixing from randomization to homogenization. American Pharm. Rew., 3(2):16-18, 2000

Akande OF, et al. The effects of lag-time and dwell-time on the compaction properties of 1 : 1 paracetamol/microsrystalline cellulose tablets prepared by pre-compression and main compression. J Pharm Pharmacol, 50:19-28, 1998

Akande OF, Ford JL, Rubinstein MH. Effect of dwell times on the pre-and main compression of a 1:1 paracetamol: microcrystalline cellulose. J Pharm Pharmacol, 47:1102, 1995

Akande OF, Rubinstein MH, Ford JL. Examination of the compaction properties of a 1:1 acetaminophen: microcrystalline cellulose mixture using precompression and main compression. J Pharm Sci, 86(8), 1997

Akbuga J. Studies on granulation properties of furosemide: effects of process and product variables on size and properties of granules. Pharmazie, 45:50, 1990

Akitoshi Y, Takayama K, Machida Y. Computer optimization of the formulation of acrylic plaster. Chem Pharm Bull, 33:4536, 1985

Alderborn G. Granule properties of importance to tableting. Acta Pharm Seuc, 25:229-238, 1988

Alderborn G, Duberg M, Nystrom C. Studies on direct compression of tablets. X. Measurement of tablet surface area by permeametry. Powder Technol, 41:49, 1985

Alkan MH, Yuksel A. Granulation in a fluidized bed II.  effect of binder amount on the final granule. Drug Dev Ind Pharm, 12:1529, 1986

Altaf SA, Hoag SW. The effect of tablet machine elasticity on the work of compaction. AAPS Meeting, November, 1993

Altaf SA, Hoag SW. Deformation of the Stokes B2 rotary tablet press:  Quantitation and influence on tablet compaction. J Pharm Sci, 84(3):337-343, 1995

Altaf SA, Hoag SW, Ayres JW`. Bead compacts. I. Effect of compression on maintenance of polymer coat integrity in multilayered bead formulations. Drug Dev Ind Pharm, 24(8):737-746, 1998

Anderson VL, MacLean RA. Design of experiments: A realistic approach. Marcel Dekker Inc., New York, 1974

Andersson J, Lindberg NO. Diosna P25 high-speed mixer equipped with instruments for measuring the rate of rotation of the main impeller motor shaft. Drug Dev Ind Pharm, 9:1495-1505, 1983

Armstrong CL, et al. a,a-Trehalose - a New Tableting Excipient?. Pharm Manuf Rev, June, 1998

Armstrong NA. Time-dependent factors involved in powder compression and tablet manufacture. Int J Pharm, 49: 1-13, 1989

Armstrong NA. Considerations of compression speed in tablet manufacture. Pharm Tech, 9: 106-116, 1990

Armstrong NA, Abourida NMAH, Gough AM. A proposed consolidation parameter for powders. J Pharm Pharmacol, 35:320-321, 1983

Armstrong NA, Blundell LP. The effect of machine speed on the compaction of some directly compressible tablet diluents. Pharmacol, 37:28P, 1985

Armstrong NA, et al. . Pharmacol, 35:320-321, 1983

Armstrong NA, Govan IT. The effect of granulation on speed dependent compression properties of lactose. J Pharm Pharmacol, 40S:70P, 1988

Armstrong NA, Govan IT. Changes in punch velocity profiles during the compaction process. J Pharm Pharmacol, 41S:123P, 1989

Armstrong NA, Palfrey LP. Punch velocities during the compaction process. J Pharm Pharmacol, 39:497-501, 1987

Armstrong NA, Palfrey LP. The effect of machine speed on consolidation of four directly compressible tablet diluents. J Pharm Pharmacol, 41:149-151, 1989

Arnaud P, Brossard D, Chaumeil J. Effect of the granulation process on nitrofurantoin granule characteristics. Drug Dev Ind Pharm, 23(1):57-66, 1998

Arndt, et al. Rotary Pelletizing Machine with Matrix Disc Having Upper and Lower Plungers. US Patent, 5,148,740, 1992

Asano T, et al. Changes in volume and compression energy upon compression of calcium silicate tablets. Drug Dev Ind Pharm, 23(7):679-685, 1997

Asgharnejad M, Storey D. Application of a compaction simulator to the design of a high-dose tablet formulation. Part I. Drug Dev Ind Pharm, 22(9&10):967-975, 1996

Augsburger LL. Instrumented capsule-filling machines: development and application. Pharm Tech, 9:111-119, 1982

Augsburger LL, et al. An approach toward establishing a scientific foundation for interpreting regulations and workshop reports on scale-up and post-approval changes. Pharm Res, 11(10):S161, 1994

Aulton ME, Tebby HG. . J Pharm Pharmacol, 27:suppl. 4P, 1975

Avallone HL. Development and scale-up of pharmaceuticals. Pharm Eng, 10(4):38-41, 1990

Baert L, Fanara D, De Baets P. Instrumentation of a gravity feed extruder and the influence of the composition of binary and ternary mixtures on the extrusion forces. J Pharm Pharmacol, 43:745-749, 1991

Baert L, Fanara D, Remon JP. Correlation of extrusion forces, raw materials and sphere characteristics. Int J Pharm, 44:676-678, 1992

Baert L, Remon JP, Knight P. A comparison between the extrusion forces and sphere quality of a gravity feed extruder and a ram feed extruder. Int J Pharm, 86:1187-192, 1992

Baichwal AR, Augsburger LL. Development and validation of a modified annular shear cell (MASC) to study fictional products of lubricants. Int J Pharm, 26:191-196, 1985

Baie SB, Newton JM, Podczeck F. The characterization of the mechanical properties of pharmaceutical materials. Eur J Pharm Biopharm, 42:138-141, 1996

Bakker A, Fasano JB, Leng DE. Pinpoint mixing problems with lasers and simulation software. Chem Eng Sci, 94-100, January, 1994

Balog S, et al. Tablet Press. US Patent, 4,880,373, 1989

Barnett ME, Muller FX, Venkatesh GM. Characterization of the tableting properties of four drug substances using a compaction simulator and Hiestand indices of tableting performance. AAPS Meeting, November, 1998

Barnett ME, Muller FX, Venkatesh GM. Characterization of the tableting properties of four drug substances using a compaction simulator and Hiestand's indices of tableting performance. AAPS Meeting, November, 1998

Barra J, Doelker E. Instrumentation of an Eccentric Tablet Press. In: Data Acq. & Meas. Techniques, ,

Bassam F, et al. Young's modulus of powders used as pharmaceutical excipients. Int J Pharm, 64 55, 1990

Bateman SD. A Comparative Investigation of Compression Simulators. Ph. D. Thesis, Liverpool Polytechnic, 1988

Bateman SD. High speed compression simulators in tabletting research. Pharm J, 240:632-633, 1988

Bateman SD, et al. A comparative investigation of compression simulators. Int J Pharm, 49:209-212, 1989

Bateman SD, Rubinstein MH, Thacker HS. Properties of paracetamol tablets produced using high precompression pressures. J Pharm Pharmacol, 41S:32P, 1989

Bateman SD, Rubinstein MH, Thacker HS. Pre - and main compression in tableting. Pharm Tech Int, 2:30-36, 1990

Bateman SD, Rubinstein MH, Wright P. The effect of compression speed on the properties of ibuprofen tablets. J Pharm Pharmacol, 39:66P, 1987

Becker D, Rigassi T, Bauer-Brandl A. Effectiveness of binders in wet granulation: a comparison using model formulations of different tabletability. Drug Dev Ind Pharm, 23(8):791-808, 1997

Benkerrour L, et al. Granule and tablet formulae study by principal component analysis. Int J Pharm, 19:27-34, 1984

Berchielli AM, Johnson BA, Dumont F. An at-line method for endpoint determination of film coating process that contain active drug substances. AAPS Meeting, November, 1997

Berman J, Schoeneman A, Shelton JT. Unit dose sampling: a tale of two thieves. Drug Dev Ind Pharm, 22(11):1121-1132, 1996

Berry H, Ridout CW. . J Pharm Pharmacol, 2:619, 1950

Beten DB, Yuksel N, Baykara T. The changes in the mechanic properties of a direct tableting agent microcrystalline cellulose by precompression. Drug Dev Ind Pharm, 20:2333, 1994

Beyer C. The simplex method for optimizing tablet formulations in practical experience (in German). Arch. Pharm. Chemi, Sci. Ed., 311:128, 1978

Bier HP, Leuenberger H, Sucker H. Determination of the uncritical quantity of granulating liquid by power measurements on planetary mixers. Pharm Ind, 4:375-380, 1979

Billardon P, Ozil P, Guyot JC. Planning experiments using an instrumented tablet machine in formulation. Drug Dev Ind Pharm, 13(14):2477-2493, 1987

Bisio A, Kabel RL, (eds).. Scale-up of Chemical Processes: Conversion from Laboratory Scale Tests to Successful Commercial Size Design. Wiley, New York, , 1985

Blaey CJ de, Polderman J. Compression of Pharmaceuticals I. The quantitative interpretation of force-displacement curves. Pharm Weekblad, 105:241-250, 1970

Blaey CJ de, Polderman J. Compression of Pharmaceuticals II. Registration and determination of force-displacement curves using a small digital computer. Pharm Weekblad, 106:57-65, 1971

Bohidar N R, et al. Selecting key parameters in pharmaceutical formulations by principal component analysis. J Pharm Sci, 64:966, 1975

Bolhuis GK, Lerk CF. . Pharm Weekblad, 108:469, 1974

Bolton S. Flawed statistical analyses and representations of fact. Drug Dev Ind Pharm, 23(8):851-853, 1997

Botzolakis JE, Casier D, Harris MR. Instrumentation of a Dosing-Disc Capsule Machine. US Patent, 4,864,876, 1989

Bouckaert S, et al. Optimization of a granulation procedure for a hydrophilic matrix tablet using experimental design. Drug Dev Ind Pharm, 22(4):321-327, 1996

Box GEP, Draper NR. Evolutionary Operation. Wiley, New York, , 1969

Box GEP, et al. Statistics for Experimenters. Wiley, New York, , 1978

Breen DT, et al. Tablet Press Controller and Method. US Patent, 4,570,229, 1986

Briscoe BJ, Rough SL. The effects of wall friction on the ejection of pressed ceramic parts. Powder Technol, 99:228-233, 1998

Brittain HG, et al. Physical characterization of pharmaceutical solids. Pharm Res, 8:963, 1991

Britten JR, Barnett MI, Armstrong NA. Studies on powder plug formation using a simulated capsule filling machine. J Pharm Pharmacol, 48:249-254, 1996

Britten JR, Barnett MI, Armstrong NA. Studies on powder plug formation using a simulated capsule filling machine. J Pharm Pharmacol, 48:249-254, 1996

Brockerdon W. Shaping Pills, Lozenges, and Black Lead by Pressure in Dies. English Pat., 9977, 1843

Buckingham E. On physically similar systems; Illustrations of the use of dimensional equations. Phys Rev NY, 4:345-376, 1914

Cabelka TD, et al. Comparison of high-shear, low-shear, and fluid bed granulation of vitamin C a strain gaged torque sensor. AAPS Meeting, November, 1992

Carless JE, Leigh S. Compression Characteristics of Powders: Radial die wall pressure transmission and density changes. J Pharm Pharmacol, 26:289-297, 1974

Carlson GT, et al. Design, fabrication and start-up of a laboratory scale compaction simulator. AAPS Meeting, November, 1998

Carr RL. Evaluating the flow properties of solids. Chem Eng Sci, 72:163, 1965

Carstensen JT. Theory of wet granulation. TechSource Conf, , 1988

Carstensen JT, et al. Correlation between hysteresis loop areas of lower punch and of die pressures versus upper punch pressures. Drug Dev Ind Pharm, 7(5), 645-648, 1981

Çelik M. Computer Aided Studies of the Tablet Compression Process. Ph. D. Thesis, Leicester Polytechnic, 1984

Çelik M. Overview of compaction data analysis techniques. Drug Dev Ind Pharm, 18:767-810, 1992

Çelik M. The past, present, and future of tableting technology. Drug Dev Ind Pharm, 22(1):1-10, 1996

Çelik M, Aulton M. The viscoelastic deformation of some tableting materials as assessed by indentation rheology. Drug Dev Ind Pharm, 22(1):67-75, 1996

Çelik M, Driscoll CE. An overview of the effects of some physico-chemical and mechanical characteristics of particulates on the compaction and post-compaction properties of compacts. Drug Dev Ind Pharm, 19:2119-2141, 1993

Çelik M, et al. Compaction simulator studies of a new drug substance: Effect of particle size and shape, and its binary mixtures with microcrystalline cellulose. Pharm Dev Tech, 1:119-126, 1996

Çelik M, Lordi NG. The pharmaceutical compaction research laboratory and information center. Pharm Tech, 3:112-116, 1991

Çelik M, Marshall K. Use of a compaction simulator system in tableting research.  Part 1:  Introduction to and initial experiments with the system. Drug Dev Ind Pharm, 15:759-800, 5, 1989

Çelik M, Mollan MJ. Minutes of pharmaceutical compaction laboratory consortium meeting. Pharm Tech Int Conf, May 18, 1990

Çelik M, Mollan MJ, Chang N. The reworkability of microcrystalline formulations. PharmTech Conf, Bologna, Italy, 1:239-262, 1991

Çelik M, Okutgen E. A feasibility study for the development of a prospective compaction functionality test and the establishment of a compaction data bank. Drug Dev Ind Pharm, 19:2309-2334, 1993

Çelik M, Ruegger CE. An Overview of Tableting Technology, Part I:  Tablet presses and instrumentation. Pharm Tech Suppl - TabGran Yearbook, 20-39, 1996

Çelik M, Travers DN. The use of elastic recovery index as a criterion of compactional behaviour of some direct compression bases. Drug Dev Ind Pharm, 11:299-314, 1985

Çelik M, Travers DN, Butlery TC. Computer logged changes of strain movements in compacts of direct compression bases and granules produced by wet massing techniques. Pharm Tech Int Conf, 80-89, 1983

Chalmers AA, Elworthy PH. Oxytetracycline tablet formulations: the effect of wet mixing time, particle size and batch variation on granule and tablet properties. J Pharm Pharmacol, 82:239, 1976

Chamberlain R. Computer systems validation for the pharmaceutical and medical device industries. Alaren, Libertyville, IL, 1991

Chang RK, Lai JW. Analysis of content uniformity data using a scatter plot and the tolerance ellipse. Pharm Tech, 5:60-66, 1994

Chapman KG. A history of validation in the United States.

part 2:  Validation of computer-related systems. Pharm Tech, 15(11):54-70, 1991

Chariot M, et al. A factorial approach to process variables of extrusion-spheronisation of wet powder masses. Drug Dev Ind Pharm, 13:1639-1649, 1987

Charlton B, Newton JM. Theoretical estimation of punch velocities and displacements of single-punch and rotary tablet machines. J Pharm Pharmacol, 36: 645-651, 1984

Chatlapalli R, Rohera BD. Optimization of formulation and process variables for pelletization by extrusion and spheronization using response surface design. AAPS Meeting, November, 1997

Chen Y, et al. Prediction of tablet drug content and hardness using the artificial neural network (ANN) and near-infrared spectroscopy (NIRS). AAPS Meeting, November, 1998

Chen Y, et al. Comparison of artificial neural network (ANN) software in the design of controlled-release formulations. AAPS Meeting, November, 1998

Chew V. Experimental design in industry. Wiley, New York, , 1958

Chilamkurti RN, Rhodes CT, Schwartz JB. Some studies on compression properties of tablet matrices using a computerized instrumented press. Drug Dev Ind Pharm, 8:63-86, 1982

Chilamkurti RN, Rhodes CT, Schwartz JB. Compression properties of formulations containing matrix and drug. Pharm Acta Helv, 58:146-152, 1983

Chilamkurti RN, Schwartz JB, Rhodes CT. Effect of addition of a soluble and an insoluble drug on the disintegration of tablets made of microcrystalline cellulose and dicalcium phosphate dehydrate. Pharm Acta Helv, 58:251-255, 1983

Chirkot T, Propst CW. Low shear granulators. In: Handbook of Pharm Granul Tech, 205-225,

Choi W. Fundamental study on agglomeration of powdered crude drugs in high speed test granulator. Pusan Bull Pharm Sci, 24(1):46-53, 1990

Chowhan ZT. Aspects of granulation scale up in high-shear mixers. Pharm Tech, 26-42, February, 1988

Chowhan ZT. Development of a new drug substance into a compacted tablet. Pharm Tech, 9:58-67, 1992

Chowhan ZT, Chow YP. Powder flow studies 2:  Powder compatibility factor and its relationship to powder flow. Drug Dev Ind Pharm, 6(1):1-13, 1980

Chowhan ZT, et al. Effect of moisture and crushing strength on tablet friability and in vitro dissolution. J Pharm Sci, 71:1371-1375, 1982

Christensen FN, Bertelsen P. Qualitative description of the wurster-based fluid-bed coating process. Drug Dev Ind Pharm, 23(5):451-463, 1997

Cliff MJ. Granulation end point and automated process control of mixer-granulators: Part 1. Pharm Tech, 4:112-132, 1990

Cliff MJ. Granulation end point and automated process control of mixer-granulators: Part 2. Pharm Tech, 5:38-44, 1990

Cliff MJ. Tablet processing facility design for the future. Pharm Eng, 11(1):15-20, 1991

Cochelard E, et al. Development of a new software for an interactive analysis of particle size. Drug Dev Ind Pharm, 22(7):721-730, 1996

Cocolas HG, Lordi NG. Axial to radial pressure transmission of tablet excipient using a novel instrumented die. Drug Dev Ind Pharm, 19:2473-2497, 1993

Cohn R, Heilig H, DeLorimier. Critical evaluation of the compactor. J Pharm Sci, 55-3:328-331, 1966

Cook GP, Summers MP. Effect of compression speed on tensile strength of tablets of binary mixtures containing aspirin. J Pharm Pharmacol, 42:462-467, 1990

Cooper J, Rees JE. Tableting research and technology. J Pharm Sci, 61(10):1511-54, 1972

Corvari V, et al. Instrumentation of a high-shear mixer:  Evaluation and comparison of a new capacitive sensor, a watt meter, and a strain-gage torque sensor for wet granulation. Pharm Res, 9(12):1525-1533, 1992

Corvari V, Fry W C, Seibert WL. Wet granulation endpoint detection in a high shear mixer instrumented with a capacitive sensor and a strain gaged torque sensor. AAPS Meeting, November, 1992

CSUG. Compaction Simulator Users Group Meeting  - Standards. http://www.bath.ac.uk/, March 23rd, 1996

CSUG. Minutes of the Compaction Simulator Users' Group. http://www.bath.ac.uk/, October 2, 1996

CSUG. Compaction Simulator Users Group Meeting  - Standards. http://www.bath.ac.uk/, July 3, 1996

Cunningham CR, Porter SC. Application of experimental design to the examination of critical film coating process variables and their effects on coated tablet quality. AAPS Meeting, November, 1997

D'Alonzo GD, O'Connor RE, Schwartz JB. Effect of binder concentration and method of addition on granule growth in a high intensity mixer. Drug Dev Ind Pharm, 16:1931-1944, 1990

Daniel J, Jan S, Goodhart F. Process characterization of a wet granulation in a high intensity mixer. AAPS Meeting, November, 1993

Danielson DW, Morehead WT, Rippie EG. Unloading and postcompression viscoelastic stress versus strain behaviour of pharmaceutical solids. J Pharm Sci, 72:342, 1983

Danjo K, Kimura H, Otsuka A. Influence of punch velocity on the compressibility of granules. Drug Dev Ind Pharm, 22(9&10):933-942, 1996

Darvas F. Application of sequential Simplex method in designing drug analogs. J Med Chem, 17:799, 1974

David ST, Augsburger LL. . J Pharm Sci, 66:155, 1977

Davies OL. The Design and Analysis of Industrial Experiments. Longman Group Ltd., New York, 1978

Davies WL, Gloor WT. Batch production of pharmaceutical granulation's in a fluidized bed I:  effects of process variables on physical properties of final granulation. J Pharm Sci, 60:1869, 1971

Davies WL, Gloor WT. Batch production of pharmaceutical granulation's in a fluidized bed II. effects of various binders and their concentrations on granulation's and compressed tablets. J Pharm Sci, 61:618, 1972

Davila-Zavala P, Smith K, Saleki-Gerhardt A. Evaluation of blend time and concentration of lubricant on physical properties of blends and tablets. AAPS Meeting, November, 1997

DeCrosta MT, et al. Thermodynamic analysis of the compaction process. AAPS Meeting, November, 1998

Dick CF, Klassen RA, Amidon GE. Determination of the sensitivity levels of a tablet formulation to variations in excipient levels and processing conditions using optimization technique. Int J Pharm, 38:23-31, 1987

DiFeo TJ, Shuster JE. Validation of a computer spreadsheet used to perform dissolution calculations. Drug Dev Ind Pharm, 22(12):1187-1192, 1996

Dincer S, Ozdurmus S. Mathematical model for enteric film coating of tablets. J Pharm Sci, 66:1070-1073, 1977

Diorio CR, Vendola TA, Hausberger AG. Development of a high shear mixing method for prediction of powder blend sensitivity to overlubrication. AAPS Meeting, November, 1997

Dobberstein RH, et al. Computer-assisted experimental design in pharmaceutical formulation. Pharm Tech, 3:84-94, 1994

Dougherty P, et al. Granulation optimization for multiple strength tablets using experimental design. AAPS Meeting, November, 1997

Down GRB, Miller RA, Chopra SK. Use of a desk-top computer in a search-type optimization of tablet formulations. Drug Dev Ind Pharm, 38:23-31, 1987

Driscol CE, Okutgen E, Çelik M. . Pharm Res, 11(10), S132, 1994

Durig T, et al.. An investigation into behaviour of a high drug-load (85%) particulate system designed for an extended-release matrix tablet. Analysis of erosion kinetics in conjunction with variations in lubrication, porosity and compression rate. J Pharm Pharmacol, 51:1085-92, 1999

Dwivedi SK, Oates RJ, Mitchell AG. Peak offset times as an indication of stress relaxation during tableting on a rotary tablet press. J Pharm Pharmacol, 43:673-678, 1991

Dwivedi SK, Oates RJ, Mitchell AG. Estimation of elastic recovery, work of decompression and Young modulus using a rotary tablet press. J Pharm Pharmacol, 44:459-466, 1992

Ebey GC. A thermodynamic model for aqueous film-coating. Pharm Tech, 4:1-6, 1987

Ebey GC. Bilayer tablet weight control theory. Pharm Tech Suppl - TabGran Yearbook, 54-57, 1996

Elliott T. Efficiency, reliability of drive systems continue to improve. Power, February:33-41, 1993

Emori H, et al. Prospective validation of high-shear wet granulation process by wet granule sieving method. II. Utility of wet granule sieving method. Drug Dev Ind Pharm, 23(2):203-215, 1997

Emschermann B, Muller F. Evaluation of force measurements during tabletting. Drug Made Germ, 25:110-112, 1982

Ertel KD, et al. Physical aspects of wet granulation. IV - Effect of kneading time on dissolution rate and tablet properties. Drug Dev Ind Pharm, 16:963, 1990

Faure A, et al. Scale-up of a pharmaceutical granulation in a laboratory scale planetary mixer. AAPS Meeting, November, 1997

Faure A, et al. A methodology for the optimization of wet granulation in a model planetary mixer. Pharm Dev Tech, 3(3):413-422, 1998

FDA. Guide to the Inspection of Computerized Systems in Drug Processing. The Blue Book, , 1983

FDA. Guidance for Industry. SUPAC-MR: Modified Release Solid Oral Dosage Forms. Scale-Up andPostapprovalChanges: Chemistry, Manufacturing, and Controls; In Vitro Dissolution Testing and In Vivo Bioequivalence Documentation. CDER, September, 1997

FDA. Guidance for Industry. Extended Release Oral Dosage Forms: Development, Evaluation, and Application of In Vitro/In Vivo Correlations. CDER, September, 1997

Fell JT, Newton JM. The prediction of the tensile strength of tablets. J Pharm Pharmacol, 22:247-248, 1970

Fell JT, Newton JM. Determination of tablet strength by the diametrical-compression test. J Pharm Sci, 59:688-691, 1970

Fell JT, Newton JM. Effect of particle size and speed of compaction on density changes in tablets of crystalline and spray-dried lactose. J Pharm Sci, 60:1866-1869, 1971

Fenyvesi E, et al. Evaluation of cyclodextrin polymer as an additive for furosemide tablet. Chem Pharm Bull, 32(2):670-677, 1984

Fielden KE, Newton JM. Extrusion and extruders. In: M. Decker Encycl Pharm Tech, 5:395-442, 1992

Fink DG, Beaty HW. Standard Handbook for Electrical Engineers.  13th edition. McGraw-Hill, New York, 2-17, 3-26:27, 20-13, 20-40, 1993

Fitzpatrick JJ, Mitchell CA, Turnbull M A. Compaction force analysis: Research tool for accessing mass-produced acetaminophen granulation's. Drug Dev Ind Pharm, 23(4):375-378, 1997

Flesch CJ. In-process control (IPC) in production by means of recording instruments. Pharm Ind, 40:757-763, 1978

Fonner DE, Buck JR, Banker GS. Mathematical optimization techniques in drug product design and process analysis. J Pharm Sci, 59(11):1587-1596, 1987

Forlano A J, Chavkin L. The effect of granule size upon disintegration time and capping in compressed tablets. J Am Pharm Assoc Sci Ed, 49:67, 1960

Frazer J. Experimental studies in the use of computers in research and development manufacturing. American Laboratory, 60-78, April, 1981

French ?. Fluid bed drying. Par Drug Ass J, march?, 1994

Froude W, see Merrifield CW. The experiments recently proposed on the resistance of ships. Trans Inst Naval Arch (London), 11:80-93, 1870

Fry W, Wu PP, Wichman KC. Granulation monitoring. PharmTech Conf, 89, 1985

Fry WC, et al. Computer-interfaced capacitive sensor for monitoring the granulation process 1: Granulation monitor design and application. J Pharm Sci, 73:420-421, 1984

Fry WC, et al. Computer-interfaced capacitive sensor for monitoring the granulation process 2: System response to process variables. Pharm Tech, 30-41, Oct, 1987

Furtwangler R, et al. Apparatus for Sorting Tablets. US Patent, 3,507,388, 1970

Garr JSM, Rubinstein MH. Compaction properties of a cellulose-lactose direct excipient. Pharm Tech, 4:76-80, 1991

Garr JSM, Rubinstein MH. An investigation into the capping of paracetamol at increasing speeds of compression. Int J Pharm, 72:117-122, 1991a

Garr JSM, Rubinstein MH. The effect of rate of force application on the properties of microcrystalline cellulose and dibasic calcium phosphate mixtures. Int J Pharm, 73:75-80, 1991b

Garr JSM, Rubinstein MH. The influence of moisture on consolidation and compaction properties of paracetamol. Int J Pharm, 81:187-192, 1992

Ghanta SR, Srinivas R, Rhodes CT. Use of mixer-torque measurements as an aid to optimizing wet granulation process. Drug Dev Ind Pharm, 10(2):305-311, 1984

Ghanta SR, Srinivas R, Rhodes CT. Some studies of the affect of processing variables on the properties of granules and tablets made by wet granulation. Pharm Acta Helv, 61(7):191-197, 1986

Giannini RP. Acquiring and using data in studies of compaction. Pharm Tech, 44-46, February, 1985

Gilliom RD, Purcell WP, Bosin TR. Sequential Simplex optimization applied to drug design in the indole, 1-methylindole, and benzo[b]thiophene series. Eur J Med Chem, 12:187-192, 1977

Gold G, et al. Granule strength as a formulation factor. I: Instrumentation. J Pharm Sci, 60:922, 1971

Gold G, Palermo BT. Hopper flow electrostatics of tableting material.  I. Instrumentation and acetaminophen formulations. J Pharm Sci, 54:310, 1965

Goodhart FW, et al. Instrumentation of a rotary tablet machine. J Pharm Sci, 57:1970-1975, 1968

Goodhart FW, Mayorga G, Ninger FC. Measurement of lower punch pulldown force and its significance. J Pharm Sci, 58(2):248-251, 1969

Gordon RE, et al.. Granulation technology and tablet characterization. In: Pharm Dosage Forms: Tablets, , 1990

Gore AY, McFarland DW, Batuyios NH. Fluid-bed granulation:  factors affecting the process in laboratory development and production scale-up. Pharm Tech, 9:114-122, 1985

Guentensberger J, et al. A statistical approach to blend uniformity acceptance criteria. Drug Dev Ind Pharm, 22(11):1055-1061, 1996

Habib YS, et al. An investigation of the effect of granulating fluid level on the physical-mechanical properties of microcrystalline cellulose (MCC) and silicified microcrystalline cellulose (SMCC). AAPS Meeting, November, 1997

Hack A. Tablet Press. US Patent, 4,408,975, 1983

Hancock BC, York P, Rowe RC. Wet granulation studies using a mixer torque rheometer. N/A, NA, 1990

Hancock BC, York P, Rowe RC. Characterization of wet masses using a mixer torque rheometer: 1:  Effect of instrument geometry. Int J Pharm, 76:239-245, 1991

Hanls EJ, King LD. . J Pharm Sci, 57:677-684, 1968

Harris MR, Schwartz JB, McGinity JW. Optimization of a slow-release tablet formulation containing sodium sulfathiazole and a montmorillonite clay. Drug Dev Ind Pharm, 11(5):1089-1110, 1985

Hausberger A, et al. Effects of blender scale, blender type and sample size on blend/granulation homogeneity. AAPS Meeting, November, 1998

Haynes JD. Statistical simulation study of new proposed uniformity requirement for bioequivalency studies. J Pharm Sci, 70:673-675, 1981

Heckel RW. Density-Pressure Relationships in Powder Compaction. Trans Metall Soc, 221:671-675, 1961

Heckel RW. An Analysis of Powder Compaction Phenomena. Trans Metall Soc, 221:1001-1008, 1961

Heda PK, Muller FX, Augsburger L. Capsule filling machine simulation I: Low force powder compaction physics relevant to plug formation. AAPS Meeting, November, 1997

Heda PK, Muller FX, Augsburger LL. Capsule filling machine simulation.  I.  Low-force powder compression physics relevant to plug formation. Pharm Dev Tech, 4(2):209-219, 1999

Heda PK, Muteba K, Augsburger LL. Comparison of the formulation requirements of dosator and dosing disc automatic capsule filling machines. AAPS Meeting, November, 1998

Hellen L, et al. Process variables of instant granulator and spheroniser: I. Physical properties of granules, extrudate and pellets. Int J Pharm, 96:197, 1993

Henderson GR. Turn-key instrumented tablet press load monitoring and analyzing system. Pharm Eng, 8(1):30-33, 1988

Hiestand EN. The determination of some important physical properties of powders. Pharm Ind, 34:262, 1972

Hiestand EN. Dispersion forces and plastic deformation in tablet bond. J Pharm Sci, 74:768, 1985

Hiestand EN, Bane JM, Strzelinski  EP. Impact test for hardness of compressed powder compacts. J Pharm Sci, 60:758, 1971

Hiestand EN, et al. Physical process of tableting. J Pharm Sci, 66:510-519, 1977

Hiestand EN, Peot CB. Tensile strength of compressed powders and an example of incompatibility as end-point on shear yield locus. J Pharm Sci, 63:605, 1974

Hiestand EN, Smith DP. Indices of tableting performance. Powder Technol, 38:145, 1984

Higuchi T, et al. The Physics of Tablet Compaction I:  A preliminary report. J Am Pharm Ass, 41:93-96, 1952

Higuchi T, et al. The Physics of Compression XIV. Lateral die wall pressure during and after compression. J Pharm Sci, 54:111-118, 1965

Higuchi T, Nelson E, Busse LW. The Physics of Tablet Compaction 3:  Design and construction of an instrumented tableting machine. J Am Pharm Ass, 43(6):344-348, 1954

Hinzpeter, et al. Circular Pelletizing Machine and Method of Controlling the Same. US Patent, 4,680,158, 1987

Hirzel J. Understanding premium-efficiency motor economics. Plant Eng, May 7:75-78, 1992

Ho AYK. Time dependent characteristics in tablet compaction. Ph. D. Thesis, Univ. of London, 1986

Ho AYK, et al. A comparison of three methods of mounting a linear variable displacement transducer on an instrumented tablet machine. J Pharm Pharmacol, 31:471-472, 1979

Ho AYK, Jones TM. Punch travel beyond peak force during tablet compression. J Pharm Pharmacol, 40:75P, 1988

Ho AYK, Jones TM. Rise Time: A new index of tablet compression. J Pharm Pharmacol, 40:74P, 1988

Hoag SW, Rippie EG. Thermodynamic analysis of energy dissipation by pharmaceutical tablets during stress unloading. J Pharm Sci, 83:903-908, 1994

Hoblitzell J. Advances in the tableting of pharmaceuticals. Pharm Tech, 167-203,

Hoblitzell JR, Rhodes CT. Recent developments in the use of instrumented tablet presses. Pharm Int, 6:45-50, 1985

Hoblitzell JR, Rhodes CT. Preliminary investigations on the parity of tablet compression data obtained from different instrumented tablet presses. Drug Dev Ind Pharm, 12:507-525, 1986

Hoblitzell JR, Rhodes CT. Instrumented tablet press studies on the effect of some formulation and processing variables. Drug Dev Ind Pharm, 16(3):469-507, 1990

Hoblitzell JR, Rhodes CT. Determination of a relationship between force-displacement and force-time compression curves. Drug Dev Ind Pharm, 16:201-229, 1990

Hokanson GC. A life cycle approach to the validation of analytical methods during pharmaceutical product development, Part 1: The initial method validation process. Pharm Tech, 118-130, September,

Holinej J, Johnson JL. Validation of an automated data acquisition and analysis system for instrumented tablet presses. AAPS Meeting, November, 1990

Holm J P. Arming Control for Servo-Adjusted Tablet Compression Machines. US Patent, 3,734,663, 1973

Holm P. High shear mixer granulators. In: Handbook of Pharm Granul Tech, 151-204,

Holm P. Effect of impeller and chopper design on granulation in a high speed mixer. Drug Dev Ind Pharm, 13:1675, 1987

Holm P, et al. Granulation in high speed mixers.  Part I: Effect of process variables during kneading. Pharm Ind, 45:806-811, 1983

Holm P, et al. Granulation in high speed mixers.  Part II: Effect of process variables during kneading. Pharm Ind, 46:97-101, 1984

Holm P, Schaefer T, Kristensen HG. Granulation in high speed mixers.  Part V: Power consumption and temperature changes during granulation. Powder Technol, 43:213-223, 1985

Holm P, Schaefer T, Kristensen HG. Granulation in high-speed mixers.  Part IV.  Effects of process conditions on power consumption and granule growth. Powder Technol, 43:225, 1985

Holm P, Schaefer T, Kristensen HG. Pelletization by controlled wet granulation in a high-shear mixer. STP Pharm Sci, 3:286, 1993

Holm P, Schaefer T, Kristensen HG. Granulation in high speed mixers.  Part VI: Effects of process conditions on power consumption and granule growth. Powder Technol, 3:286, 1993

Holman LE. The compaction behavior of particulate materials.  An elucidation based on percolation theory. Powder Technol, 66:265, 1991

Holman LE. The compressibility of pharmaceutical particular systems. An illustration of percolation. Int J Pharm, 71:81-94, 1991

Holman LE, Leuenberger H. The relationship between solid fraction and mechanical properties of compacts - the percolation theory model approach. Int J Pharm, 46:35, 1988

Holman LE, Leuenberger H. Effect of compression speed on the relationship between normalized solid fraction and mechanical properties o compacts. Int J Pharm, 57:R1-R5, 1989

Holman LE, Leuenberger H. The significance of slopes of the semilogarithmic relationship between hardness and solid fraction of porous compacts. Powder Technol, 64:233, 1991

Holman LE, Marshall K. Calibration of a compaction simulator for the measurement of tablet thickness during compression. Pharm Res, 10:816-822, 1993

Holve DJ, Harvil TL. In-process particle size distribution measurements. Cegram Ind, XX:19, 1995

Holzer AW, Sjogren J. Instrumentation and calibration of a single-punch press for measuring the radial force during tableting. Int J Pharm, 3:221-230, 1979

Hooker DB. Potted Strain Gage. US Patent, 3,791,205, 1974

Horsthuis GJB, et al. Studies on upscaling parameters of the Gral high shear granulation process. Int J Pharm, 92:143, 1993

Houghton RJ, Honeysett RA, Bubb GE. It's all in "The Punch" - a new approach to tablet machine instrumentation. AAPS Meeting, November, 1997

Huffine CL. A Study of the Bonding and Cohesion Achieved in the Compaction of Particulate Materials. Ph. D. Thesis, Columbia Univ, 1954

Huffine CL, Bonnilla CF. Particle size effects in the compression of powders. A I Ch E Journal, 8:490-493, 1962

Hunter BM. Interpretation of data produced by tablet machine simulators. ProcPGTablet, 54-63, 1984

Hunter BM, et al. A high speed compression simulator. J Pharm Pharmacol, 28S:65P, 1976

Hunter BM, Ganderton D. The influence on pharmaceutical granulation of the type and capacity of mixers. J Pharm Pharmacol, 255:71P-78P, 1973

Ilkka J. Imstrumentation of Rotary Tablet Machine by a Portable Measuring System. In: Data Acq. & Meas. Techniques, ,

Inchley AJ. Evaluation of an equation to calculate material tensile strength for doubly convex, curved, circular tablets. PharmTech Conf, Bologna, Italy, 1:522-532, 1991

Inghelbrecht S, et al. Instrumentation of a roller compactor and modeling of the roller compaction process by neural networks. AAPS Meeting, November, 1997

Itiola OA, Pilpel N. Formulation effects on the mechanical properties of metronidazole tablets. J Pharm Pharmacol, 43:145, 1991

Iwata A. Purposes and examples of high speed mixing wet agglomeration (presentation handout). N/A, , 1990

Jaegerskou A, et al. Granulation in high speed mixers.  Part III: Effects of process variables on intergranular porosity. Pharm Ind, 46:310-314, 1984

Jaminet F, Hess H. Studies on compaction and dry granulation (in German). Pharm Acta Helv, 41:39, 1966

Jarosz PJ, Parrott EL. Factors influencing axial and radial tensile strengths of tablets. J Pharm Sci, 71(6):607-614, 1982

Jarvinen MJ, Juslin MJ. . Powder Technol, 28:115, 1981

Jawadekar MS, Srinivas R. Evaluation of new granulation equipment:  High intensity mixing equipment vs. conventional planetary mixer. PharmTech Conf, , 1983

Jerome E, DeLacourte A, Leterme P. The measurement of resulting forces on a roller compactor. PharmTech Conf, Holland, 87-104, April, 1990

Jerzewski RL, Rudnic EM. The development of a low-cost intelligent tablet compression monitor using a personal computer. Pharm Tech, 32-41, September, 1986

Jetzer WE. Measurement of hardness and strength of tablets and their relation to compaction performance of powders. J Pharm Pharmacol, 38:254-258, 1985

Jetzer WE, Leuenberger H, Sucker H. Compressibility and compatibility of powder mixtures. Pharm Tech, 33-48, November, 1983

Johnstone RW, Thring MW. Pilot Plants: Models and Scale-up Methods in Chemical Engineering. McGraw-Hill, New York, , 1957

Jones TM. The physicotechnical properties of starting materials used in tablet formulation. Int J Pharm, 2:17-24, 1981

Jones TM, Ho AYK, Barker JF. The Use of Instrumentation in Tablet Research, Development and Production. Pharm Tech, 42-47, March, 1985

Juppo AM, Kervinen L, Yliruusi J. Skewness and kurtosis of force-time profile obtained from compression of lactose, glucose and manitol granules. Eur J Pharm Biopharm, 41(6):374-381, 1995

Juslin MJ, Paronen TP. On the accuracy of displacement measurements by instrumented single punch machine. J Pharm Pharmacol, 32:796-798, 1980

Kahn GM, Zhu J. Dissolution studies of ibuprofen powders: effect of particle size on dissolution rate and simulation of dissolution process of mixed binary systems. J Chin Pharm Sci, 7(1), 1998

Katagiri T, et al. Method and Apparatus for Controlling Powder Molding Press. US Patent, 5,288,440, 1994

Kawakita K, Ludde KH. Some considerations on powder compression equations. Powder Technol, 4:61-68, 1970

Kay D, Record PC. Automatic wet granulation end-point control system. Manuf Chem Aerosol News, 9:45-46, 1978

Kaye BH. Using an expert system to monitor mixer performance. Powder Bulk Eng, 36-40, January, 1991

Kaye BH. A new approach to powder rheology. Pharm Tech, 116-124, March, 1994

Kennerley JW, Newton JM, Stanley P. . Acta Pharm Seuc, 18:106-107, 1981

Kennon L, Swintosky JV. . J Am Pharm Ass, 47:397, 1927

Khan KA, Rhodes CT. Effect of compaction pressure on the dissolution efficiency of some direct compression systems. Pharm Acta Helv, 47:594-607, 1972

Khan KA, Rhodes CT. . Can J Pharm Sci, 10:62-65, 1975

Khan KA, Rhodes CT. . J Pharm Sci, 64:166, 1975

Khan KA, Rhodes CT. . J Pharm Sci, 65:1837, 1976

Kim H, Venkateh G, Fassihi R. Compactibility characterization of granular pectin for tableting operation using a compaction simulator. Int J Pharm, 161:149-159, 1998

Kim KT, Kim JS. Stage 1 compaction behaviour of tool steel powder under die pressing. Powder Met, 41(3):199-203, 1998

Kitazawa S, et al.. . J Pharm Pharmacol, 27:765, 1975

Klinzing GE, Dhodapkar SV. How an expert system can help you solve bulk solids handling problems. Powder Bulk Eng, 14-22, January, 1993

Knoechel EL, et al. Measurement of Force within a Tableting Machine. US Patent, 3,255,716, 1966

Knoechel EL, Sperry CC, Lintner CJ. Instrumented rotary tablet machines 2:  Evaluation and typical applications in pharmaceutical research development and production studies. J Pharm Sci, 56(1):116-130, 1967

Knoechel EL, Sperry CC, Ross HE. Instrumented rotary tablet machines 1:  Design, construction, and performance as pharmaceutical research and development tools. J Pharm Sci, 56(1):109-115, 1967

Kolter K, Heinz R, Fussnegger B. Compression properties of Ludipress LCE - a new direct compression excipient. AAPS Meeting, November, 1998

Konkel P, Mielck JB. A compaction study of directly compressible vitamin preparation for the development of a chewable tablet:  Part 1. Pharm Tech, 138-146, March, 1992

Kopcha M, et al. Monitoring the granulation process in a high shear mixer/granulator: an evaluation of three approaches to instrumentation. Drug Dev Ind Pharm, 18(18):1945-1968, 1992

Kornchankul W, Parikh NH, Sakr A. The effect of process variables on the content uniformity of a low dose drug in a high shear mixer. AAPS Meeting, November, 1997

Korsch W. A computer-controlled monitoring device for rotary presses. Pharm Tech, 4:62,94-108, 1981

Korsch W, et al. Rotary Tablet Press. US Patent, 5,116,214, 1992

Kramer H. Tablet Press. US Patent, 4,569,650, 1986

Kramer H. Rotary Tablet Press. US Patent, 5,462,427, 1995

Kristensen HG. Agglomeration of powders. Acta Pharm Seuc, 25:187-204, 1988

Kristensen HG, et al. Granulation in high speed mixers.  Part IV: Effect of liquid saturation on the agglomeration. Pharm Ind, 46:763-767, 1984

Kristensen HG, Schaefer T. Granulation: a review on pharmaceutical wet-granulation. Drug Dev Ind Pharm, 13:803, 1987

Kristensen J, et al.. Direct pelletization in a rotary processor controlled by torque measurements.  I. Influence of process variables. Pharm Dev Tech, 5(2):247-256, 2000

Krycer I, Pope DG, Hersey JA. The interpretation of powder compaction data - a critical review. Drug Dev Ind Pharm, 8:307, 1982

Kumar V, Sunder N, Potdar A. Critical factors in developing pharmaceutical formulations - An overview, Part I. Pharm Tech, 3:94:102, 1992

Kushchevskaya NF. Experience and information exchange. Powder Met, 36(11-12):668-672, 1997

Lai F KY. A prototype expert system for selecting pharmaceutical powder mixers. Pharm Tech, 22-31, August, 1988

Laicher A, et al. A modified signal analysis system for end-point control during granulation. Eur J Pharm Sci, 5:7-14, 1997

Lammens RF, et al. Evaluation of force-displacement measurements during powder compaction.  Part 1: Precision and accuracy of force measurements. Int J Pharm, 1(3):26-35, 1980

Landin M, et al. The effect of batch size on scale-up of pharmaceutical granulation in a fixed bowl mixer-granulator. Int J Pharm, 134:243-246, 1996

Landin M, et al.. Scaleup of a pharmaceutical granulation in planetary mixers. Pharm Dev Tech, 4(2):145-150, 1999

Landin M, Rowe RC, York P. Characterization of wet powder masses with a mixer torque rheometer.

3. Nonlinear effects of shaft speed and sample weight. J Pharm Sci, 84/5:557-560, 1995

Landin M, York P, Cliff MJ. Scale-up of a pharmaceutical granulation in fixed bowl mixer granulators. Int J Pharm, 133:127-131, 1996

Lang BA, et al. Use of the mixer torque rheometer to evaluate effect of drug substance morphology on the wet granulation process. AAPS Meeting, November, 1997

Le Floc'h JY. Automation of aqueous film coating. Drug Dev Ind Pharm, 22(1): 45-50, 1996

Lerk CF, Bolhuis GK, Boer AH. . J Pharm Sci, 86:205-211, 1979

Lerk CF, Bolhuis GK, DeBoer AH. . Pharm Weekblad, 109:945, 1974

Leuenberger H. Design and Optimization approaches in the field of granulation drying and coating. In: Proc. 53rd Int. Cong. Pharm Sci, 493-511,

Leuenberger H. Granulation, new technique. Pharm Acta Helv, 57(3):72-80, 1982

Leuenberger H. The compressibility and compactibility of powder systems. Int J Pharm, 12:41-55, 1982

Leuenberger H. Monitoring granulation. Manuf Chem Aerosol News, 67-71, May, 1983

Leuenberger H. Scale-up of granulation processes with reference to process monitoring. Acta Pharm Technol, 29(4), 274-280, 1983

Leuenberger H. Monitoring granulation, Part 2. Manuf Chem Aerosol News, June, 1983

Leuenberger H, Bier HP, Sucker HB. Theory of the granulating-liquid requirement in the conventional granulation process. Pharm Tech, 6:61-68, 1979

Leuenberger H, Jetzer W. The compactibility of powder system - a novel approach. Powder Technol, 37:209-218, 1984

Leuenberger H, Leu R. The formation of a tablet: a site-bond percolation phenomenon. J Pharm Sci, 81:976, 1992

Leuenberger H, Luy B, Studer J. New development in the control of a moist agglomeration and pelletization process. STP Pharm Sci, 6:303, 1990

Leuenberger H, Robera B. Fundamentals of powder compression I. The compactibility and compressibility of pharmaceutical powders. Pharm Res, 3(1):12-22, 1986

Leuenberger H, Robera B. Fundamentals of powder compression II. The compression of binary mixtures. Pharm Res, 3(2):65-74, 1986

Levin M. Granulation end-point determination and scale-up. Pharm Manuf Int, 129:131, 1997

Levin M, Tsygan L, Dukler S. Press Simulation Apparatus. US Patent, 6,106,262, 2000

Lewis DA. Pharmaceutical Tablet Press Control Mechanism. US Patent, 4,817,006, 1989

Lewis L W, Shotton E. Some studies of friction and lubrication using an instrumented tablet machine. J Pharm Pharmacol, 17S:71S-81S, 1965

Lindberg N-O. Some experience of continuous granulation. Acta Pharm Seuc, 25:239-246, 1988

Lindberg N-O, Hansson E, Holmquist B. The granulation of a tablet formulation in a high-speed mixer, Diosna P25.  Influence of intragranular porosity and liquid saturation. Drug Dev Ind Pharm, 13:1067, 1987

Lindberg N-O, Jonsson C. The granulation of lactose and starch in a recording high speed mixer, Diosna P25. Drug Dev Ind Pharm, 11(2&3), 387-403, 1985

Lindberg N-O, Jonsson C, Holmquist B. The granulation of a tablet formulation in a high-speed mixer, Diosna P25. Drug Dev Ind Pharm, 11:917-930, 1985

Lindberg N-O, Leander L. Studies on granulation in a small planetary mixer 1:  Instrumentation. Acta Pharm Seuc, 14:191-196, 1977

Lindberg N-O, Leander L, Wenngren L. Studies on granulation in a change can mixer. Acta Pharm Seuc, 11:603-620, 1974

Lipps D, Sakr AM. Characterization of wet granulation process parameters using response surface methodology.  1> Top-spray fluidized bed. J Pharm Sci, 83:937, 1994

Liu SX, Ewert D, Tallavajhala S. Optimizing uniformity of content in low dose tablet formulations for direct compression - a novel approach. AAPS Meeting, November, 1997

Liu SX, Tallavajhala S. Adhesivity index - a novel approach in pharmaceutical powder characterization. AAPS Meeting, November, 1997

Lloyd J, York P, Cook GD. Punch elasticity compensation in the calibration of displacement measurements on a compaction simulator. J Pharm Pharmacol, 43S:80P, 1991

Lloyd PJ, Yeung PCM, Freshwater DC. The mixing and blending of powders. J Soc Cosmet Chem, 21:205-220, 1970

Long WM. Radial pressures in powder compaction. Powder Met, 6:73-86, 1960

Lopez O. Implementing software applications compliant with 21 CFR 11. Pharm Tech, 3:118-132, 2000

Lordi NG, Tomozawa H, Cuitino AM. Quantitative characterization of the pressure volume relation during die compaction of powders. AAPS Meeting, November, 1997

Lowenthal W. . J Pharm Sci, 61:1695-1711, 1972

Mackaplow MB, Rosen LA, Michaels JN. Effect of primary particle size on granule growth and endpoint determination in high shear granulators. AAPS Meeting, November, 1997

MacLean RA, Anderson VL. . Technometrics, 17:149, 1975

Macleod HM, Marshall K. The determination of density distribution in ceramic compacts using autoradiography. Powder Technol, 16:107-122, 1977

Maganti L, Çelik M. Compaction Studies on Pellets I. Uncoated pellets. Int J Pharm, 95:29-42, 1993

Maganti L, Çelik M. Compaction Studies on Pellets II. Uncoated pellets. Int J Pharm, 103:55-67, 1994

Majuru S, Wurster DE. The effect of composition on the tableting indices of binary powder mixtures. Pharm Dev Tech, 2(4):313-321, 1997

Malinowski HJ, Smith WE. Effects of spheronization process variables on selected tablet properties. J Pharm Sci, 63:285-288, 1974

Mann SC. An Investigation into Factors Affecting the Capping of Pharmaceutical Tablets. M. Sc. Thesis, Univ. of Bath, 1984

Mann SC. An investigation of the effect of individual segments of tableting cycle on the capping and lamination of pharmaceutical tablets. Acta Pharm Seuc, 24:54-55, 1987

Mann SC, et al. The influence of punch tolerance on capping. J Pharm Pharmacol, 33:25P, 1981

Mann SC, et al. The influence of precompression pressure on capping. J Pharm Pharmacol, 34:49P, 1982

Mann SC, et al. The effect of high speed compression at sub-atmospheric pressure on the capping tendency of pharmaceutical tablets. J Pharm Pharmacol, 35:44P, 1983

Marks AM, Sciarra JJ. Effect of size on other physical properties of granules and their corresponding tablets. J Pharm Sci, 57:497, 1968

Marshall K. Instrumentation of tablet and capsule filling machines. Pharm Tech, 68-82, March, 1983

Marshall K. Monitoring punch forces and punch movements as an aid to developing robust tablet formulations. Drug Dev Ind Pharm, 15(13):2153-2176, 1989

Marshall K. Report and Recommendation of the USP Advisory Panel on Physical Test Methods: Compactibility Test. Pharm Forum, May-June: 8293-8297, 1999

Marshall K. Fundamentals of tablet formation. Arden House Conference, , 1999

Marshall PV, York P, Maclaine JQ. An investigation of the effect of the punch velocity on the compaction properties of Ibuprofen. Powder Technol, 74:171-177, 1993

Marshall PV, York P, Richardson R. The effect of duration of compression on the axial recovery properties of compacts of a crystalline drug substance. J Pharm Pharmacol, 38:47P, 1986

Martin SA, Bogda MJ. Evaluation and selection of tablet compression equipment. Pharm Tech, 26-41, July, 1988

Martinez-Pacheco R, Vila-Jato JL, Souto C. Prediction of tablet properties by compression force-time profile parameters. Drug Dev Ind Pharm, 16(2):231-241, 1990

Martinez-Pacheco R, Vila-Jato JL, Souto C. The effect of maximum compression force and drug content on compression force-time profile parameters. Drug Dev Ind Pharm, 16(2):243-254, 1990

Martinez-Pacheko R, Gomez-Amoza JL, vila-Jato JL. . Ind Pharm, 4:207, 1985

Massimo G, et al. Disintegration force and disintegrated mass simultaneously measured in pharmaceutical tablets. AAPS Meeting, November, 1998

Matz C, et al. On the accuracy of a new displacement instrumentation for rotary tablet presses. Drug Dev Ind Pharm, 25:117-130, 1999

McKinstry PL, Atwong CT, Atwong MK. An application of a life cycle approach to computer system validation. Pharm Eng, 46-50, May /June, 1994

Mehta A, Zoglio MA, Carstensen JT. Ball milling as a measure of crushing strength of granules. J Pharm Sci, 67:905, 1978

Mendes R. Wet granulation principles. TechSource Conf, , 1991

Meshali M, El-Banna HM, El-Sabbagh H. Use of fractional factorial design to evaluate granulation's prepared In a fluidized bed. Pharmazie, 38:323, 1983

Miller RW. Advances in pharmaceutical roller compactor feed system designs. Pharm Tech, 3:154-162, 1994

Minet M, et al.. . Sci Techn Pharm, 12(1):17-35, 1983

Mitrevej A, Augsburger LL. Adhesion of tablets in a rotary tablet press I. Instrumentation and preliminary study of variables affecting adhesion. Drug Dev Ind Pharm, 6(4):331-337, 1980

Mitrevej A, Augsburger LL. Adhesion of tablets in a rotary tablet press II. Effects of blending time, running time, and lubricant concentration. Drug Dev Ind Pharm, 8(2):237-282, 1982

Miyamoto Y, et al. An evaluation of process variables in wet granulation. Drug Dev Ind Pharm, 21:2213, 1995

Miyamoto Y, et al. Simultaneous optimization of wet granulation process involving factor of drug content dependency on granule size. Drug Dev Ind Pharm, 24(11):1055-1056, 1998

Mollan M, Çelik M. Tabletability of maltodextrins and acetaminophen mixture. Drug Dev Ind Pharm, 20:3131-3149, 1994

Monedero M, et al. Effect of compression speed and pressure on the physical characteristics of maltodextrin tablets. Drug Dev Ind Pharm, 24(7):613-621, 1998

Monedero Perales MC, et al. Comparative tableting and miscrostructural properties of a new starch for direct compression. Drug Dev Ind Pharm, 22(7):689-695, 1996

Morehead WT, Rippie EG. Timing relationships among maxima of punch and die-wall stress and punch displacement compaction of viscoelastic solids. J Pharm Sci, 79:1020, 1990

Muller FX, Augsburger LL. The role of the displacement-time waveform in the determination of Heckel behavior under dynamic conditions in a compaction simulator and a fully Instrumented rotary tablet machine. J Pharm Pharmacol, 46:468-475, 1994

Muller FX, Schierstedt D. Elimination of punch upsetting in force-displacement measurements of single-punch tabletting machines. Drug Made Germ, 27(4):177-182, 1984

Munoz Ruiz, et al. Theoretical estimation of dwell and consolidation times in rotary tablet machines. Drug Dev Ind Pharm, 18(9):2011-2028, 1992

Murray FJ. The application of expert systems to pharmaceutical processing equipment. J Pharm Sci, 100-109, March, 1989

Murray FJ. Tablet press automation: A modular approach to fully integrated production. Drug Dev Ind Pharm, 22(1):35-43, 1996

Nagaoka, et al. Method of Deciding the Quality of Resin Workpiece in a Compression-Molding Process. US Patent, 5,395,565, 1995

Naini V, Kanapuram S, Ahmed S. Evaluation of selected excipients during wet granulation and tableting of a high dose drug using instrumented equipment. AAPS Meeting, November, 1997

Nair R, Hoag S, Muller F. An innovative approach to the complete characterization of material properties using a compaction simulator. AAPS Meeting, #1142, 1999

Nakai Y, Nakajima S, Kakizawa H. . Chem Pharm Bull, 22:2910, 1974

Nelder JA, Mead R. . Comput J, 1:308, 1965

Nelson E. The physics of tablet compression VIII: Some preliminary measurements of die wall pressure during tablet compression. J Am Pharm Ass, 44:494-497, 1955

Nelson E, et al.. The Physics of Tablet Compression IV:  Relationship of ejection, and upper and lower punch forces during compressional process. J Am Pharm Ass, XLIII(10):596-02, 1954

Nerella NG, Chakrabarti S, Menon A. Scale-up of a tablet operation based on a neural network methodology. AAPS Meeting, November, 1996

Newton JM, et al. The compressive to tensile strength ratio of pharmaceutical compacts. Int J Pharm, 93:249-251, 1993

Newton JM, Ingham S, Onabajo OO. The effect of strain rate on mechanical strength of tablets. Acta Pharm Technol, 32:61-62, 1986

Nokhodchi A, et al. The effect of moisture on the properties of ibuprofen tablets. Int J Pharm, 118:191-197, 1995

Nokhodchi A, et al. The effect of moisture content on the energies involved in the compaction of ibuprofen. Int J Pharm, 120:13-20, 1995

Nokhodchi A, et al. The effects of compression rate and force on the compaction properties of different viscosity grades of hydroxypropylmethylcellulose 2208. Int J Pharm, 129:21-31, 1996

Nokhodchi A, Rubinstein MH. Compaction simulators in tableting research. Pharm Tech Suppl - TabGran Yearbook, 6:18, 1996

Nokhodchi A, Rubinstein MH, Ford J. The effect of particle size and viscosity grade on the compaction properties of hydroxypropylmethylcellulose 2208. Int J Pharm, 126:189-197, 1995

Nokhodchi A, Rubinstein MN, Ford JL. The effect of viscosity grade of hydroxypropylmethylcellulose on its compaction properties. J Pharm Pharmacol, 46:1075, 1994

Nokhodchi A, Rubinstein MN, Ford JL. The effect of particle size and viscosity grade on the compaction propertieof of hydroxypropylmethylcellulose. Int J Pharm, 126:189-197, 1995

Nurnberg E, Hopp A. Temperature measurement during tableting. Pharm Tech, 81-101, September, 1981

Nystrom C, Alex W, Malmqvist K. A new approach to tensile strength measurement of tablets. Acta Pharm Seuc, 14:317, 1977

Oates RJ, Mitchell AG. Calculation of punch displacement and work of compaction on a rotary tablet press. J Pharm Pharmacol, 41:517-523, 1989

Oates RJ, Mitchell AG. Comparison of calculated and experimentally determined punch displacement on a rotary tablet press using both Manesty and IPT punches. J Pharm Pharmacol, 42:388-396, 1990

Oates RJ, Mitchell AG. A new method of estimating volume during powder compaction and the work of compaction on a rotary tablet press from measurements of applied vertical force. J Pharm Pharmacol, 46:270-275, 1993

Obiorah BA. Possible prediction of compression characteristics from pressure cycle plots. Int J Pharm, 1:249-255, 1978

O'Brien MJ, et al. Method and Apparatus for Controlling a Press. US Patent, 5,491,647, 1996

Ogawa S, et al. A new attempt to solve the scale-up problem for granulation using response surface methodology. J Pharm Sci, 83(3):439-443, 1994

Okapala CJ. Compaction Simulator Performance Analysis. Ph. D. Thesis, Liverpool John Moores University, 1997

Okutgen E. Dimensional Analysis and Internal Stress Predictions in Film Coated Tablets. Ph. D. Thesis, Leicester Polytechnical, 1991

Oldshue JY. Mixing processes. In: Scale-up (Bisio, Kabel), ,

Ormos Z, Pataki K, Csukas B. Studies on granulation in a fluidized bed II.  the effects of the amount of the binder on the physical properties of granules formed in a fluidized bed. Hung J Ind Chem, 1:307, 1973

Ormos Z, Pataki K, Csukas B. Studies on granulation in a fluidized bed III.  calculation of the feed rate of granulating liquid. Hung J Ind Chem, 1:463, 1973

Otz M, et al. Effects of the metal type and the roughness of the die wall on the expended work for tablet ejection. Pharm Dev Tech, 5(1), 19-26, 2000

Palmieri GF, Wehrle P. Evaluation of ethylcellulose-coated pellets optimized using the approach of Taguchi. Drug Dev Ind Pharm, 23(11):1069-1077, 1997

Panelli R, Filho F A. Compaction equation and its use to describe powder consolidation behaviour. Powder Met, 41(2):131-133, 1998

Parikh DM.. Understanding batch fluid bed drying. Powder Bulk Eng, 4:1-5, 1992

Parker MD, Rowe RC. Rheological characterization of wet powder masses. J Pharm Pharmacol, 41:31P, 1989

Parker MD, Rowe RC, Upjohn NG. Mixer torque rheometry: A method for quantifying the consistency of wet granulation's. Pharm Tech Int, 2:50-64, 1990

Parker MD, York P, Rowe RC. Use of granulation theology in identifying interactions between microcrystalline cellulose and typical polymer binders. J Pharm Pharmacol, 39:89P, 1987

Paronen P, et al. Application of portable rotary press instrumentation and compaction simulator to tablet development. Proc 13th PT Conf, 1:641-648, 1994

Parrott EL. Compression. In: Pharm Dosage Forms: Tablets, , 1990

Peck G. Principles of wet granulation. TechSource Conf, , 1990

Pedersen MA, Kristensen HD. Compaction behavior of 4-hydroxybenzoic acid and 4-esters compared to their mechanical properties. Eur J Pharm Biopharm, 41:323-328, 1995

Pedersen MA, Rubinstein MH, Bateman SD. Measuring punch-time displacement profiles on a rotary tableting machine using a high-speed video system. Pharm Tech, 4:44-52, 1993

Pendharkar CM, et al. Influence of the specific surface area of selected raw materials on the granulation process using an instrumented mixer. Pharm Tech, 44-53, April, 1990

Pento T. Procedure for Simulating Tablet Compression. US Patent, 5,517,871, 1996

Picker KM. A new theoretical model to characterize the densification behavior of tableting materials. Eur J Pharm Biopharm, 49:267-273, 2000

Pitt KG, et al. The effect of punch velocity on the tensile strength of aspirin tablets. J Pharm Pharmacol, 39:65P, 1987

Pitt KG, Newton JM, Stanley P. Effects of compaction variables on porosity and material tensile strength of convex-faced aspirin tablets. J Pharm Pharmacol, 42:219-225, 1990

PMA, Computer Systems Validation Committee. Validation concepts for computer systems used in the manufacture of drug products. Pharm Tech, 10(5):24-34, 1986

Poska RP, et al. Evaluation of high output tablet machines. Pharm Tech, 78-94, September, 1988

Poska RP, Glasscock JF, Badalamenti  AJ. Testing the performance of a tablet weight control monitor. Pharm Tech, 1:56-66, 1990

Prytherch E, et al. Press Machine with Means to Adjust Punching Force. US Patent, 5,211,964, 1993

Radebaugh GW, Babu SR, Bondi JN. Characterization of the viscoelastic properties of compacted pharmaceutical powders by a novel nondestructive technique. Int J Pharm, 57:95, 1989

Ragnarsson G, Sjogren J. Work of friction and net work during compaction. J Pharm Pharmacol, 35:201-204, 1983

Ragnarsson G, Sjogren J. Force-displacement measurements in tableting. J Pharm Pharmacol, 37:145-150, 1984

Railkar AM, Schwartz JB. Evaluation and comparison of a moist granulation technique with conventional wet granulation. AAPS Meeting, November, 1997

Ramberger R, Burger A. On the application of the Heckel and Kawakita equation to powder compaction. Powder Technol, 43:1-9, 1985

Ramsey P. Physical Evaluation of Compressed Powder Systems. Ph. D. Thesis, U. of Iowa, 1996

Rangaiah KV, Chattaraj SC, Das SK. Effects of process variables and excipients on tableting parameters of norfloxacin tablets. Drug Dev Ind Pharm, 20:2175, 1994

Rantanen J, et al. On-line monitoring of moisture content in an instrumented fluidized bed granulator with a multi-channel NIR moisture sensor. Powder Technol, 99:163-170, 1998

Rayleigh Lord. The principle of similitude. Nature, 95(2368, March 18):66-68, 1915

Razaghi AM. High Speed Compaction Simulator Study of Spray Dried Granular Sorbitol, Ethylcellulose and Polyethylene Oxide in Direct Compression Technology. M. Sc. Thesis, Temple University, Philadelphia, PA, 1998

Razaghi AM, Venkatesh G, Fassihi R. Consolidation and compaction behavior of sorbitol in pharmaceutical technology: A compaction simulator study. AAPS Meeting, November, 1997

Record PC. Practical experience with high-speed pharmaceutical mixer/granulators. Manuf Chem Aerosol News, 11:65, 1979

Record PC. A review of pharmaceutical granulation technology. J Powder Bulk Solids Technol, 4:33, 1980

Rees JE, Hersey JA, Cole ET. Simulation device for preliminary tablet compression studies. J Pharm Sci, 61:1313-1315, 1972

Rees JE, Malamataris S. Can creep analysis be used to predict optimal conditions for tablet precompression. Pharm Tech, 60-66, May, 1993

Rees JE, Rue PJ. . Drug Dev Ind Pharm, 4:131-156, 1978

Rees JE, Rue PJ. Time-dependent deformation of some direct compression excipients. J Pharm Pharmacol, 30:601-607, 1978

Rees JE, Rue PJ, Richardson SC. Work-of-failure measurements on formulated tablets. J Pharm Pharmacol, 29:38P, 1977

Reier G, Cohn R, Rock S. Evaluation of factors affecting the encapsulation of powders in hard gelatin capsules.  I: Semi-automatic capsule machines. J Pharm Sci, 57-4:660-666, 1968

Reier GE, Oliver JE, Wheatley TA. The compressibility of wet-granulated formulations containing microcrystalline cellulose. AAPS Meeting, November, 1997

Rekhi GS, Caricofe RB, Parikh DM. A new approach to scale-up of a high-shear granulation process. Pharm Tech Suppl - TabGran Yearbook, 58-67, 1996

Rekhi GS, et al. Evaluation of critical formulation and processing variables for Metoprolol Tartrate tablets using high-shear granulation - I. Pharm Res, 10(10):S134, 1993

Reynolds O. An experimental investigation of the circumstances which determine whether the motion of water shall be direct or sinusous, and of the law of resistance in parallel channels. Philos Trans R Soc London, 174:935-982, 1883

Riebel R, Loffler F. The fundamentals of particle size analysis by means of ultrasonic spectrometry. Part Part Syst Charact, 6:135-143, 1989

Rime AF, et al. A new high performance data acquisition system interfacing an instrumented tablet machine to a microcomputer. Acta Pharm Technol, 36(4):264-268, 1990

Rippie EG, Danielson DW. Viscoelastic stress/strain behavior of pharmaceutical tablets:  Analysis during unloading and postcompression periods. J Pharm Sci, 70:476-482, 1981

Rippie EG, Morehead WT. Structure evolution of tablets during compression unloading. J Pharm Sci, 83(5):708-715, 1994

Ritala M, et al. Influence of liquid bonding strength on power consumption during granulation in a high shear mixer. Drug Dev Ind Pharm, 14:1041, 1988

Ritala M, Virtanen S. The effect of binder solution quantity and lactose particle size on granule properties. Acta Pharm Nord, 3:229, 1991

Ritschel WA. . Pharm Ind, 26:757, 1964

Ritter A, Sucker HB. Methods of measuring tablet capping. Pharm Tech, 109-114, September, 1980

Ritter A, Sucker HB. Studies of variables that affect tablet capping. Pharm Tech, 57-62, March, 1980

Roberts RJ, Rowe RC. The effect of punch velocity on the compaction of a variety of materials. J Pharm Pharmacol, 37:377-384, 1985

Roberts RJ, Rowe RC. The effect of relationship between punch velocity and particle size on the compaction behaviour of materials with varying deformation mechanisms. J Pharm Pharmacol, 38:567-571, 1986

Roberts RJ, Rowe RC. Brittle fracture propensity measurements on tablet-sized cylindrical compacts. J Pharm Pharmacol, 38:526-528, 1986

Roberts RJ, Rowe RC. The Young's modulus of pharmaceutical materials. Int J Pharm, 37:15-18, 1987

Roberts RJ, Rowe RC. The compaction of pharmaceutical and other model materials - a pragmatic approach. Chem Eng Sci, 42:903-911, 1987

Roberts RJ, Rowe RC. Brittle/Ductile behaviour in pharmaceutical materials. Int J Pharm, 36:205-209, 1987

Roberts RJ, Rowe RC. Source and batchwise variability in the compressibility of microcrystalline cellulose. J Pharm Pharmacol, 39:70P, 1987

Rocksloh K, et al.. Optimization of crushing strength and disintegration time of a high-dose plant extract tablet by neural networks. Drug Dev Ind Pharm, 25:1015-25, 1999

Romano SJ, Landsman C, Moran PJ. ISO 9000 and the pharmaceutical industry:  An overview. Pharm Eng, 5/6:16-18, 1994

Rowe RC. Expert systems in solid dosage development. Pharm Ind, 55:1040-1045, 1993

Rowe RC. Formulating pharmaceuticals using expert systems. Pharm Tech Int, 5(8):46-52, 1993

Rowe RC. Expert systems enhance product formulation. Manuf Chem Aerosol News, 66(8):33-35, 1995

Rowe RC. Characterization of wet powder masses using a mixer torque rheometer. 4. Effect of blade orientation. Int J Pharm, 133:133-138, 1996

Rowe RC. Intelligent software systems for pharmaceutical product formulation. Pharm Tech Europe, 3:36:43, 1997

Rowe RC, Parker MD. Mixer torque rheometry: An update. Pharm Tech, 74-82, March, 1994

Rowe RC, Roberts RJ. The mechanical properties of powders. Adv Pharm Sci, Academic Press, 1995

Rowe RC, Sadeghnejad GR. The rheological properties of microcrystalline cellulose powder/water mixes - measurement using a mixer torque rheometer. Int J Pharm, 38:227-229, 1987

Rowley FA, Hitchner JA, Pagliero AJ. Challenging the Thomas Sentinel III:  A case study in computer systems validation. Pharm Tech, 11:52-59, 1989

Rowlings CE, et al. Resolution of the material and machine contributions to the area to height ratio obtained from force-time powder compression data. I. Instrumented laboratory press. Pharm Acta Helv, 71 155-160, 1996

Royce A, et al. Alternative granulation technique: melt granulation. Drug Dev Ind Pharm, 22(9&10):917-924, 1996

Rubinstein MH. Evolutionary operations:  To optimize tablet manufacture. D&CI, 44-47,104-109, April, 1975

Rubinstein MH. Compaction properties of a cellulose-lactose direct-compression excipient. Pharm Tech, 4:76-80, 1991

Rubinstein MH. Applications of compaction simulators. Pharm Manuf Int, 177-182, 1992

Rubinstein MH. Tableting machines-The need for a quantum leap in design. Pharm Tech, 42-50, April, 1992

Rubinstein MH, Bateman SD, Thacker HS. Compression to constant thickness or constant force:  Producing more consistent tablets. Pharm Tech, 15(9):150-158, 1991

Rue PJ, et al. Analysis of tablet fracture during tableting by acoustic emission techniques. Int J Pharm, 1(1):2-5, 1979

Ruegger CD. An Investigation of the Effect of Compaction Profiles on the Tableting Properties of Pharmaceutical Materials. Ph. D. Thesis, , 1996

Rupp R. Flow and other properties of granulates. Bull Chim Farm, 116:251, 1997

Russo EJ. Typical scale-up problems and experiences. Pharm Tech, 8(11):46-56, 1984

Sadjady SK, Rubinstein MH, Simpkin GT. Investigation of Tableting Machine Variables on Tablet Friction and Lubrication: Compression and Ejection Speed and Ejection Lag Time. In: PT, v2, Horwood, UK, 93, , 1993

Scarpone AJ, Dalvi UG, De Lorimer AE. Preparing tablet granulators in a 100 cu ft. solids processor. Pharm Tech, 44-52, September, 1986

Schaa P, Willee F. How's & why's of  tablet press automation. Pharm Eng, 10(1):8-14, 1990

Schaefer T. Equipment for wet granulation. Acta Pharm Seuc, 25:205, 1988

Schaefer T, et al. Granulation in different types of high speed mixers. Part 1: Effects of process variables and up-scaling. Pharm Ind, 48:1083, 1986

Schaefer T, et al. Granulation in different types of high speed mixers. Part 2: Comparison between mixers. Pharm Ind, 49:297-304, 1987

Schaefer T, et al. Melt pelletization in a high shear mixer. V. Effect of apparatus variables. Acta Pharm Nord, 1:133, 1993

Schaefer T, Holm P, Kristensen HG. Wet granulation in a laboratory scale high shear mixer. Pharm Ind, 52:1147, 1990

Schaefer T, Holm P, Kristensen HG. Melt granulation in a laboratory scale high shear mixer. Drug Dev Ind Pharm, 16:1249, 1990

Schaefer T, Holm P, Kristensen HG. Melt pelletization in a high shear mixer. I. Effects of process variables and binder. Acta Pharm Nord, 4:133, 1992

Schaefer T, Worts O. Control of fluidized bed granulation:  II.  Estimation of droplet size of atomized solutions. Arch. Pharm. Chemi, Sci. Ed., 5:178-193, 1977

Schaefer T, Worts O. Control of fluidized bed granulation:  I.  Effects of spray angle, nozzle height and starting materials on granule size and size distribution. Arch. Pharm. Chemi, Sci. Ed., 5:51-60, 1977

Schaefer T, Worts O. Control of fluidized bed granulation:  III. Effects of inlet air temperature and liquid flow rate on granule size and size distribution.  Control of moisture content of granules in the drying phase. Arch. Pharm. Chemi, Sci. Ed., 6:69-82, 1978

Schaefer T, Worts O. Control of fluidized bed granulation:  IV. Effects of binder solution and atomization on granule size and size distribution. Arch. Pharm. Chemi, Sci. Ed., 6:14-25, 1978

Schaefer T, Worts O. Control of fluidized bed granulation:  V.  Factors affecting granule growth. Arch. Pharm. Chemi, Sci. Ed., 6:1-13, 1978

Schlierenkämper R, et al. Press Ram for a Pelleting Machine. US Patent, 5,607,704, 1997

Schmidt PC, Koch H. Zur Auswertung von Presskraft-ZeitpKurven. Eur J Pharm Biopharm, 37:7, 1991

Schrank-Junghani H, Bier HP, Sucker H. The measurement of die wall forces to determine the minimum concentration of lubricant needed for tablet formulations. Acta Pharm Technol, 30(3):224-234, 1984

Schrank-Junghani S, Bier HP, Sucker H. Studies in quantitative determination of lubricant properties for tableting processes. Pharm Tech, 71-84, September, 1983

Schwartz JB. The instrumented tablet press: Uses in research and production. Pharm Tech, 9:102-132, 1981

Schwartz JB. Optimization techniques in product formulation. J Soc Cosmet Chem, 32, 287-301, 1981

Schwartz JB, Flamholtz JR, Press RH. Computer optimization of pharmaceutical formulations II:  Application in Troubleshooting. J Pharm Sci, 62:1581, 1973

Schwartz JB, Flamholz JR, Press RH. Computer optimization of pharmaceutical formulations I:  General procedure. J Pharm Sci, 62(7):1165-1170, 1973

Schwartz JB, Nguyen NH, Schnaare RL. Compaction study on beads: Compression and consolidation parameters. Drug Dev Ind Pharm, 20:3105-3129, 1994

Schwartz JB, Szymczak CE. Power consumption measurements and the mechanism of granule growth in a wet granulation study. AAPS Meeting, November, 1997

Sellappan P, et al. Mixer torque rheometry improvements: studies of mixer blade geometry and mode of binder addition. AAPS Meeting, November, 1997

Sendall FEJ, Stainforth JN. A study of power adhesion to metal surfaces during compression of effervescent pharmaceutical tablets. J Pharm Pharmacol, 38:489-493, 1985

Shah KB, Augsburger LL, Marshall K. An investigation of some factors influencing plug formation and fill weight in a dosing disk-type automatic capsule-filling machine. J Pharm Sci, 75(3):291-296, 1986

Shah NH, et al. Strategies in the development of a tablet formulation of a poorly soluble drug for double-blind clinical studies. Pharm Tech, 152-160, September, 1994

Shah SA, Parrott EL. . J Pharm Sci, 65:1784-1790, 1976

Shek E, Mahmood G, Jones RE. Simplex search in optimization of capsule formulations. J Pharm Sci, 69(10):1135-1142, 1980

Sheskey P, Cabelka TD, Robb RT. Use of roller compaction in the preparation of controlled-release hydrophilic matrix tablets containing methycellulose and hydropropyl methycellulose. Pharm Tech, 132-150, September, 1994

Sheskey PJ, Williams DM. Comparison of low-shear and high-shear wet granulation techniques and the Influence of percent water addition in the preparation of a controlled-release matrix tablet containing HPMC and a high-dose, highly water-soluble drug. Pharm Tech, 3:80-92, 1996

Shimada Y, et al. Method of Checking a Pickup Load Cell in a Rotary Tabletting Machine. US Patent, 5,229,044, 1993

Shivanand P, Sprockel OL. Compaction behaviour of cellulose polymers. Powder Technol, 69:177-184, 1969

Shlanta S, Milosovich G. Compression of pharmaceutical powders I. Theory and instrumentation. J Pharm Sci, 53(5):562-564, 1964

Shotton E, Deer JJ, Ganderton D. The instrumentation of a rotary tablet machine. J Pharm Pharmacol, 5:106T-114T, 1963

Shotton E, Ganderton D. The strength of compressed tablets 1:  The measurement of tablet strength and its relation to compression. J Pharm Pharmacol, 5:87-92, 1960

Shotton E, Ganderton D. The strength of compressed tablets 2:  The bonding of granules during compression. J Pharm Pharmacol, 5:93-96, 1960

Shotton E, Ganderton D. The strength of compressed tablets III:  The relation of particle size, bonding, and capping in tablets of sodium chloride, aspirin, and hexamine. J Pharm Pharmacol, 13S:144T-152T, 1961

Sinko CM. Granulation characterization: Methods and significance. In: Handbook of Pharm Granul Tech, 419-470,

Sinko CM, Carlson GT, Oksanen CA. Recompression of powder: An investigation into the causes of tablet strength reduction. AAPS Meeting, November, 1995

Sirois P.J., Et al. Scaleup of a high-shear granulation process using a normalized impeller work parameter. Pharm Dev Tech, 5(3),365-374, 2000

Sixsmith D. Instruments for tablet technology. Manuf Chem Aerosol News, 1:16-21, 1977

Sixsmith D. The effect of compression on some physical properties of microcrystalline cellulose powders. J Pharm Pharmacol, 29:33-36, 1977

Sixsmith D. Punch tip geometry effects on powder compression. J Pharm Pharmacol, 32:854, 1980

Sixsmith D, McCluskey D. The effect of punch tip geometry on powder movement during the tableting process. J Pharm Pharmacol, 33:79-81, 1980

Smart I. Single pot processing and its integration within an automated production plant. Pharm Eng, 5-6:76, 1993

Snyder JE, Bak J. Using SPC to control the weight of encapsulated pharmaceutical products. Pharm Tech, 60-64, November, 1989

Solazzi MC, et al. Powder Compacting Press Apparatus and Methods. US Patent, 5,202,067, 1993

Spendley W, et al.. . Technometrics, 4:441, 1962

Spicer AI. Punch Presses. US Patent, 4,823,658, 1989

Spring MS. The conductivity of the damp mass during the massing stage of the granulation process. Drug Dev Ind Pharm, 9(8), 1507-1512, 1983

Stamm A, Paris L. Influence of technological factors on the optimal granulation liquid requirement measured by power consumption. Drug Dev Ind Pharm, 11(2&3), 330-360, 1985

Staniforth JN. Lubricating Rotary Tablet Press. US Patent, 5,017,122, 1991

Staniforth JN, Quincey SM. Granulation monitoring in a planetary mixer using a probe vibration analysis technique. Int J Pharm, 32, 177-185, 1986

Staniforth JN, Walker S, Flander P. Granulation monitoring in a high speed mixer/processor using a probe vibration analysis technique. Int J Pharm, 31, 277-280, 1986

Stanley P, Newton JM. The tensile fracture stress of capsule-shaped tablets. J Pharm Pharmacol, 32:852, 1980

Stetsko G. Statistical Experimental Design and its Application to Pharmaceutical Development Problems. Drug Dev Ind Pharm, 12:1109-1123, 1986

Stevens PTA. The relationship between particle size distribution of granules and weight variation of tablets. Acta Pharm Technol, 26:304, 1980

Stiel DM. Method Invoking Tabletting Compression Force Control for Optimizing Tabletted Formulation Parameters. US Patent, 4,121,289, 1978

Stiel DM, et al. Tablet Press Related Instrumentation for Use in Development and Control of Formulations of Pharmaceutical Granulation's. US Patent, 4,100,598, 1978

Strickland WA, Busse LW, Higuchi T. The physics of tablet compression XI. Determination of porosity of tablet granulation's. J Am Pharm Ass, 45:482, 1956

Sunada J, et al. Study of standard tablet formulation based on fluidized-bed granulation. Drug Dev Ind Pharm, 24(3):225-233, 1998

Suren G. . Acta Pharm Seuc, 7:483, 1976

Takai T, Takayama K, Nambu N. Optimum formulations of griseofulvin/hydroxypropyl cellulose solid dispersions with desirable dissolution properties. Chem Pharm Bull, 32:1942-1947, 1984

Takayama K, Imaizumi H, Nambu N. Mathematical optimization of formulation of indomethacin/polyvinylpolypyrrolidone/methyl cellulose solid dispersions by the sequential unconstrained. Chem Pharm Bull, 33(1):292-300, 1985

Takayama K, Nagai  T. Novel computer optimization methodology for pharmaceutical formulations investigated by using sustained-release granules of indomethacin. Chem Pharm Bull, 37(1):160-167, 1989

Takayama K, Nambu N, Nagai T. Computer optimization of formulation of flufenamic acid/polyvinylpolypyrrolidone/methyl cellulose solid dispersions. Chem Pharm Bull, 31:4496-4507, 1983

Tatalueva NN, Chumakov NP, Tyutenko VS. Design of equipment for the hydrostatic compaction of powder products. Powder Met, 36(9-10):561-564, 1997

Terashita K, Kato M, Ohike A. Analysis of end-point with power consumption in high speed mixer. Chem Pharm Bull, 38(7):1977-1982, 1990

Terashita K, Watano S, Miyanami K. Determination of end-point by frequency analysis of power consumption in agitation granulation. Chem Pharm Bull, 38(11):3120-3123, 1990

Tetzlaff R. GMP documentation requirements for automated systems: 

Part 3, FDA inspections of computerized laboratory systems. Pharm Tech, 5:70-83, 1992

Tetzlaff R. GMP documentation requirements for automated systems:  Part 2. Pharm Tech, 4:60-72, 1992

Tetzlaff R. GMP documentation requirements for automated systems:  Part 1. Pharm Tech, 3:112-124, 1992

The Upjohn Co.. Pelleting Apparatus. Foreign Patent, 1,152,061, 1969

Thoma K, Ziegler I. Investigations on the influence of the type of extruder for pelletization by extrusion-spheronization. I. Extrusion behavior of formulations. Drug Dev Ind Pharm, 24(5):401-411, 1998

Thoma K, Ziegler I. Investigations on the influence of the type of extruder for pelletization by extrusion-spheronization.  II. Sphere characteristics. Drug Dev Ind Pharm, 24(5):413-422, 1998

Thomas WI, Rowley G, Doveston G. An investigation of the influence of the core material properties on the compression and properties of dry-coated tablets. Drug Dev Ind Pharm, 24(10):973-978, 1998

Timko RJ, et al. Instrumentation of a vertical high shear mixer with a motor slip monitoring device. Drug Dev Ind Pharm, 12(10):1375-1393, 1986

Timko RJ, et al. Use of a motor load analyzer to monitor the granulation process in a high intensity mixers. Drug Dev Ind Pharm, 13(3):405-435, 1987

Titley PC. Agglomeration and granulation of powders, processing and manufacturing practice. Acta Pharm Seuc, 25:267-280, 1988

Travers DN, Merriman MPH. Temperature changes occurring during the compression and the recompression of solids. J Pharm Pharmacol, 22S:11S-16S, 1970

Travers DN, Rogerson AG, Jones TM. A torque arm mixer for studying wet massing. N/A, N/A, 1975

Travers DN, Webster R. Interfacing a microcomputer to instrumented tablet machines. Manuf Chem Aerosol News, 10:55-59, 1981

Trowbridge L, et al. A comparison of methods for determining powder flow: Correlation with tableting performance. AAPS Meeting, November, 1997

Turkoglu M, Murray M, Sakr A. Practical application of neural computing for prediction of characteristics of tablets produced by a multi-variable roller compaction process. AAPS Meeting, November, 1997

van Aerde P, Boullart L, Van Stevern. A microprocessor-based data acquisition and processing system for studying powder compression in a single punch tabletting machine. Pharm Ind, 1068-1072, 1984

van Oudtshorn MCB, et al.. . J Pharm Pharmacol, 23:583, 1971

Venkatesh G, Pudipeddi M, Faulkner P. Correlation's between compaction simulator and instrumented Betapress. AAPS Meeting, November, 1993

Venkatesh GM, et al.. Correlations between a hydraulic compaction simulator, instrumented Manesty Betapress and the Presster. AAPS Meeting, , 1999

Vezin WR, et al. The Effect of precompression in a rotary machine on tablet strength. Drug Dev Ind Pharm, 9(8):1465-1474, 1983a

Vezin WR, Khan KA, Pang HM. Adjustment of precompression force to reduce mixing-time dependence of tablet tensile strength. J Pharm Pharmacol, 35:555-558, 1983b

Vogel Pj, Schmidt PC. Force-time curves of a modern rotary tablet machine II.  Influence of comression force and tableting speed on the deformation mechanisms of pharmaceutical substances. Drug Dev Ind Pharm, 19:1917, 1993

Vojnovic D, et al. Wet granulation in a small scale high shear mixer. Drug Dev Ind Pharm, 18:961, 1992

Vojnovic D, Moneghini M, Chicco D. Nonclassical experimental design applied in the optimization of a placebo granulate formulation in high-shear mixer. Drug Dev Ind Pharm, 22(9&10):997-1004, 1996

Vojnovic D, Moneghini M, Rubessa F. Simultaneous optimization of several response variables in a granulation process. Drug Dev Ind Pharm, 19:1479, 1993

Vojnovic D, Moneghini M, Rubessa F. Optimization of granulates in a high shear mixer by mixture design. Drug Dev Ind Pharm, 20:1035, 1994

Von Schmidt PC, Tenter U. Displacement measurements of rotary presses. Pharm Ind, 426-430, 1985

Von Schmidt PC, Tenter U, Hocke J. Force and displacement characteristic of rotary tabletting machines. 1st Comm.; Instrumentation of a single punch for force measurements. Pharm Ind, 1546-1553, 1986

Walker E. The Properties of powders. Part VIII. The Influence of the velocity of compression on the apparent compressibility of powders. Trans Farad Soc, 19:614-620, 1923

Walter J T, Augsburger L. A computerized force-displacement instrumentation system for a rotary press. Pharm Tech, , 1986

Waring MJ, Rubinstein MH, Howard JR. Acoustic emission of pharmaceutical materials: the effect of compression speed, ejection, lubrication and tablet weight. Int J Pharm, 40:12-22, 1987

Watano S, Terashita K, Miyanami K. Determination of end point with a complex granulation applying infrared moisture sensor. Chem Pharm Bull, 39(4):1013-1017, 1991

Watano S, Terashita K, Miyanami K. Frequency analysis of power consumption in agitation granulation of powder materials with sparingly soluble acetaminophen. Chem Pharm Bull, 40(1):269-271, 1992

Watt PR. Tablet press instrumentation. Manuf Chem Aerosol News, 6:58-61, 1983

Wehrle P, et al. Response surface methodology: an interesting statistical tool for process optimization and validation: example of wet granulation in a high-shear mixer. Drug Dev Ind Pharm, 19:1637, 1993

Werani J. Production experience with end point control. Acta Pharm Seuc, 25:247-266, 1988

Westlake WJ. Use of confidence intervals in analysis of comparative bioavailability trials. J Pharm Sci, 61:1340-1341, 1972

Westlake WJ. Symmetrical confidence intervals for  bioequivalence trials. Biometrics, 32:741-744, 1976

Wikberg M, Alderborn G. Compression characteristics of granulated materials. II. Evaluation of granule fragmentation during compression by tablet permeability and porosity measurements. Int J Pharm, 62 229, 1990

Wikberg M, Alderborn G. Compression characteristics of granulated materials. IV. The effect of granule porosity on the fragmentation propensity and the compactibility of some granulation's. Int J Pharm, 69:239, 1991

Williams III RO, Sriwongjanya M, Barron MK. Compaction Properties of microcrystalline cellulose using tableting indices. Drug Dev Ind Pharm, 23(7):695-704, 1997

Williams JJ. Force Measurement and Analysis Particularly Relating to Rotary Tablet Presses. US Patent, 4,030,868, 1977

Williams JJ. Applied Instrumentation Providing Tabletting Compression Force. US Patent, 4,016,744, 1977

Williams JJ. Force Measurement and Analysis Particularly Relating to Rotary Tablet Presses. US Patent, 4,099,239, 1978

Williams JJ, Stiel DM. An intelligent tablet press monitor for formulation development. Pharm Tech, 3:26-38, 1984

Wilson KE, Crossman E. The influence of tablet shape and pan speed on intra-tablet film coating uniformity. Drug Dev Ind Pharm, 23(12):1239-1243, 1997

Wilson KE, Potter A. Advantages of impact testing over hardness testing in determining physical integrity of tablets. Drug Dev Ind Pharm, 24(11):1017-1024, 1998

Windheuser JJ, et al. The Physics of tablet compression 13. Development of die wall pressure during compression of various materials. J Pharm Sci, 52:767-772, 1963

Woodruff CW, Nuessle NO. Effect of processing variables on particles obtained by extrusion-spheronization processing. J Pharm Sci, 61:787-790, 1972

Wray PE. The Instrumented Rotary Tablet Machine. D&CI, 105(3):58-68b,158-160, 1969

Yamada M. Press Forming Apparatus for Sintered Parts. US Patent, 5,156,854, 1992

Yang L, et al.. Dynamic analysis of in-die stress relaxation during 'peak offset time' in tableting of pharmaceutical solids. AAPS Meeting, #2918, 1999

Yang L, Venkatesh G, Fassihi R. Characterization of compactability and compressibility of poly(ethylene oxide) polymers for modified release application by compaction simulator. J Pharm Sci, 85:1085-1090, 1985

Yang L, Venkatesh G, Fassihi R. Characterization of compressibility of poly(ethylene oxide) polymers for modified release application by compaction simulator. Int J Pharm, 152:1085-1090, 1996

Yang L, Venkatesh G, Fassihi R. Compaction simulator study of a novel triple-layer tablet matrix for industrial tableting. Int J Pharm, 152:45-52, 1997

Yao W, Takahashi K, Koyama K. Theoretical tool for optimum design of mixer, and visualization and quantification of mixing performance. J Chem Eng Japan, 31(2): 220-227, 1998

Yliruusi J, Tihtonen R. High-speed granulation.  Part I: Effect of some process parameters of granulation on the properties of unsieved and wet-sieved granules. Acta Pharm Fen, 98:39, 1989

Yliruusi J, Tihtonen R. High-speed granulation.  Part II: Effect of some process parameters on the properties of wet- and dry-sieved granules. Acta Pharm Fen, 98:53, 1989

Yliruusi JK, Antikainen O. New parameters derived from tablet compression curves. Part I. Force-time curve. Drug Dev Ind Pharm, 23(1):69-79, 1997

York P. A consideration of experimental variables in the analysis of powder compaction behaviour. J Pharm Pharmacol, 31:244, 1979

York P. Powder failure testing - pharmaceutical applications. Int J Pharm, 6:89, 1980

Yu HCM, et al. Multiple compression and plasto-elastic behavior of paracetamol and microcrystalline cellulose mixtures. J Pharm Pharmacol, 40:669-673, 1988

Yu HCM, et al.. Compaction characterisation of paracetomol and avicel mixtures. Drug Dev Ind Pharm, 15:801-823, 1989

Zega J, et al. Scale-up of the wet granulation process for a dicalcium phosphate formulation using impeller power consumption. AAPS Meeting, November, 1995

Zega J, et al. Optimization of the roller compaction process for an ibuprofen formulation. AAPS Meeting, November, 1995

Zeiss JC, Beck B, Patel K. Development of a monitoring system for an instrumented rotary tablet press. Pharm Tech, 60-67, August, 1986

Zlokarnik M. Dimensional analysis and scale-up in chemical engineering. Springer, , 1991

Zlokarnik M. Problems in the application of dimensional analysis and scale-up of mixing operations. Chem Eng Sci, 53(17):3023-3030, 1998